Ingenico iCT220 - Page 11

Technical Manual ICT220 • 11/36
Copyright © 2009 Ingenico All rights reserved
Power supply voltage Vcc
− 5V, 3V & 1.8V
Grip
− 8 friction contacts (middle chip)
− Contact for card presence and removal
Number of operations
− 100,000
Synchronous cards
− Separate logical outputs on contacts 4 and 8
− Possibility of specific drivers development on request.
Examples of usable cards:
• asynchronous T=0
• asynchronous T=1
• synchronous :
GEM Plus: GPM 416/896 5V and compatible
GPM 256
GPM 271
GPM 2k (S10)
GPM 8k (S9)
GFM 2k (S8)
GFM 4k (S8)
SIEMENS: SLE 404
SLE 4418 (S9)
SLE 4428 (S9)
SLE 4432 (S10)
SLE 4436
SLE 4442 (S10)
ATMEL: AT88SC1003
etc…
Hardware and software base of the ICT220 is open and enables the development of other
specific synchronous drivers.