Technical Manual ICT220 • 17/36
Copyright © 2009 Ingenico All rights reserved
1.2.11. Power supply unit
• Wall-mount unit
• Standard, rectified regulated
• Meeting international safety standards
The power supply unit is adapted to the constraints and standards in force in the country of
use.
The characteristics of the power supply unit for Europe (not UK) are:
Input voltage
− 230V - 50 Hz
Output voltage
− 8 V, 2 A
Protection
− Against surges : Thermal fuse placed on primary
− Against conducted interference: integrated filter
− Europe: CE
− USA: UL, CSA, CEC (in progress)
Standards
− Australia: C-Tick
Mechanical interface
− Power supply jack with safety catch
− Straight flexible cable
− About 1,8 meters long between ICT220 and power supply, plug in on
ICT220 side.
Weight
− 115 g
Dimensions
− approx 77 x 25 x 89 mm (L x w x h)
1.2.12. External links
Rs232 version
• Phone line Port
• USB slave (USB B - function)
• USB master (USB A - host)
Conform to USB2.0 (full speed)
• Simplified RS232
To Next Page
Loading...
Need help?
General
