Technical Manual ICT220 • 24/36
Copyright © 2009 Ingenico All rights reserved
If no application is initialized, the applications manager displays a message asking for an
application to be initialized.
If at least one application is initialized, the terminal is operational. The applications manager
then awaits an event to poll the software applications loaded in the terminal.
2.5.1.2. Common parameters Initialisation
The applications manager is used to initialize the common parameters:
Date, time, message display language, phone network configuration data, Pin-pad
connection, local downloading of remote diagnostics.
2.5.2. Terminal maintenance
The terminal has maintenance functions for:
• Properties;
• Local downloading;
• Diagnostics.
2.5.2.1. Properties
The properties function is used to print the following tickets:
• List of applications downloaded into the terminal: version number, checksum, etc. The
applications manager prints this information for itself and for the operating system;
• Applications call time: remote collect, download, etc;
• Total number of transactions in each application file contained in the terminal.
To Next Page
Loading...
