Technical Manual ICT220 • 12/36
Copyright © 2009 Ingenico All rights reserved
1.2.5. SAM readers (Security Access Module)
2 SAM readers can accept cards in "microsim ID000" (minicard) format.
The SAMs readers are easy to access
through two access flaps.
NOTE: Synchronous cards and SAM contacts C4 and C8 are not managed.
These cards are memory extensions and enable to increase the size of the files in the
terminal.
1.2.6. Magnetic stripe card reader
The ICT220 is equipped with a swipe manual reader.
• Large acceptance range:
− Slow swipes at 10 cm/sec ;
− Fast swipes at 100 cm/ sec;
− High and low coercivity swipe reader.