Ingrasys iED N Series User Manual

Date Format
This field allows the administrator to set “mm/dd/yyyy” or “dd/mm/yyyy” or “yyyy-mm-dd”
or “dd mm yyyy” for Date Format.
Time Setting
This field allows the administrator to set 24HR or 12HR for Time Setting.
Enable Daylight Saving Time
This field allows the administrator to enable/disable Daylight Saving time.
Manual Setting
This field allows the administrator to configure the iED N-002 data and time manually and
follows Date Format and Time Setting.
Sync with NTP
NTP server IP and correct time zone must be selected to activate this option. After
configuration, the iED N-002 will synchronize its time with server periodically. If Daylight
Saving Time is enabled, the time will be one hour earlier than NTP server time.
5.4.2 Change Password
This page allows the administrator to change password.
Admin Password
This field shows the present the administrator’s password and it should be shielded by a
star sign.
New Admin Password
This field allows the administrator to set new password and it should be shielded by a
star sign.
Retype New Admin Password
This field allows the administrator to retype new admin password and it should be
shielded by a star sign. This must be same as new admin password.
5.4.3 Maintenance
This page allows the administrator to set Maintenance.

Ingrasys iED N Series Specifications

General

Brand	Ingrasys
Model	iED N Series
Category	Controller
Language	English