Ingrasys iED N Series - Sensor Upgrade; Cloud Management

External Power (Zigbee HT Sensor Only)
This fields shows Yes if connect external power otherwise shows “–“.
5.8.6 Sensor Upgrade
This page allows the administrator to load file then upload to specific sensors or device.
5.8.7 Cloud Management
Cloud Server Setting
This field allows the administrator to set Cloud Client Setting.
Enable Push Data to Cloud Server
This field allows the administrator to set Push Data function as enabled/disabled. If the
checkbox is not filled, the Push Data function is disabled.
Server IP
This field allows the administrator to view the present setting or set the IPv4 address of
cloud server and only accept “dotted decimal notation” format (i.e., 192.168.60.229).
Port Number
This field allows the administrator to set port number of cloud server, the default is 80
(size is 1 ~ 65535)
GUID
This field shows the unique identified number for registering
Password
This field allows the administrator to set user’s password and it should be shielded by a
star sign.