Ingrasys iED N Series User Manual

3. Installation and Connection
To install the iED N-002 on a network and change its configuration, you need a workstation
running Microsoft Windows (XP, 7 or later) and connect the iED N-002 to LAN.
3.1 Connect to the main power
Insert the end of the power connector to the AC-In jack on the rear of the iED N-002. Connect the
other end into a power socket (100 ~ 240V).

Ingrasys iED N Series Specifications

General

Brand	Ingrasys
Model	iED N Series
Category	Controller
Language	English