User’s Manual
5.5.2 SNMP Trap Setting
This page allows the administrator to set SNMP Trap.
SNMP Trap Receiver Address List
Clicking will show ADD dialog, once one or more entries have been selected, it is not
available.
Receiver Address
This field allows the administrator to set the IPv4/IPv6 address and only accept
“dotted decimal notation” format (i.e., 192.168.60.229) or “hexadecimal” format (i.e.,
2001:1234:100:f101:2e0:d8ff:feff:b522).
Event Level
This field allows the administrator to set Event Level.
[Critical]: Critical level event will be sent to Receiver Address
[Warning]: Warning and Critical level event will be sent to Receiver Address
[Information]: Information and Warning and Critical level event will be sent to
Receiver Address
Trap Version
This field allows the administrator to set trap version for SNMP v1 or SNMP v2c or
SNMP v3.
Description
This field allows the administrator to set the description string. The maximum length
of the string is 31 characters.
One or more entries have been selected and to click , they will be deleted from list.
To Next Page
Loading...
Need help?
General