5.3.5 Security
This page allows the administrator to set Network Access Protection.
Network Access Protection
Enable Network Access Protection
This check box is the parameter enabling Network Access Protection. When check box of
SSH/SNMP/HTTP(S) has selected then in 1/5/10/30 minutes, after unsuccessful attempts
for 5/10/20/30/100 times, block the IP for 5/30 minutes or 1 hour or 1 day.
SSL Secure Certificate
The administrator can upload a secure certificate issued by a trusted provider. Afterward
to access the iED N-002 by SSL connection and there will not be any alert or error
message. The privilege of read-only won’t see this function.
5.3.6 Network Service
This page allows the administrator to set Network Service that including SSH and SSL and
Ping and ModBus/TCP and RADIUS.