Ingrasys iED N Series - Specifications

User’s Manual
6.2 Specifications
Models iED N-002
System Board
 32-Bits Fast Ethernet RISC Processor
 Memory: Flash ROM 128MB / SDRAM 128MB
 PHY: 10/100 PHY
Network
 Auto-sense 10/100 Mbps Fast Ethernet
 RJ45 LAN Connector
Reset Button
 Hardware reset
Analog input
 16 sets of Analog input for DC voltage/current configurable
sensor
 Measurement range: 0~10VDC/4-20mA
 Accuracy: ±3%
Digital input
 32 sets of Digital input
Digital Output
 16 sets of Digital output
 Max. 24VDC 1A
Power Adapter  Input: 100V ~ 240V / 50Hz ~ 60Hz
Power Consumption
 20W (MAX)
LED Display
 Power x1 (Green) Front Panel
 Status x1 (Yellow) Front Panel
 LAN 10/100M Link x1 (Green ON/OFF) Rear Panel
 LAN Activity x1 (Yellow) Rear Panel
Dimension
 436(W) x 875 (H) x 180 (D) mm