Programming the SmartLink-GP 21
Programming manual
Dialing parameters
Remove no.
digits
Number of digits to be
removed from the prefix of
every phone number dialed
on the GSM network.
Example: phone
number 0039 02
111111, with Remove
no. digits=4 result 02
111111
Add area code Area code consisting of
numbers, '*' and '#' to be
added to every phone
number dialed on the GSM
network.
Example: to be applied
in countries where the
area code is not
required for local
dialing but is
necessary for GSM
network calls.
Hidden call If selected, incoming and
outgoing calls will not
generate visual signals on
the "Ongoing call" LED.
This feature is a useful
way of hiding
intrusion-panel
generated
communications from
intruders.
Credit Parameters
Warning each
unit of
remaining-
credit used
If selected, the SmartLink
will generate a “Low Credit”
event when credit reaches
the "Remaining credit level"
and each time the remaining
credit decreases by a further
unit (£, €,$, etc.).
Example: If the
“Remaining credit
level” is £12 and the
"Warning each unit of
remaining-credit used"
option has been
selected, the first
warning will appear
when the balance
reaches £11.90, then
at £10.78 and £9.94,
etc.
The functionality of
the credit-notification
process is subject to
temporary or
permanent
unavailability due to
the GSM provider.
Automatic
credit residue
notification
When the SIM credit goes
below this value, the
SmartLink will generate a
“Low credit” event.
Group
Parameter Description Note
To Next Page
Loading...