22 Programming the SmartLink-GP
Programming manual
Other parameters
GSM network
priority
If selected, all calls
generated by the voice and
ContactID dialler or diverted
to reserve line generator will
be diverted to the GSM
network.
Under these
circumstances, the
land line (if available)
will act as the GSM
network reserve line.
If this option is
selected, in the event
of 'No GSM service,
the device will switch
to the land line (PSTN)
and check for GSM
service restoral every
3 minutes. If the GSM
service restores during
land line (PSTN) free
status, the device will
switch back to the
GSM network
instantly.
Ring for black-
list numbers
If selected, it will generate a
ring on the phone terminals
connected to terminals 13
and 14, when the SmartLink-
GP receives a call from a
Black list phone number. This
parameter applies to
incoming calls only.
DTMF menu
without code
If selected, DTMF commands
can be sent without user
code entry during outgoing
calls from the device. Press
'#'.
Group
Parameter Description Note
To Next Page
Loading...