Programming Manual
Operating the system 71
FROM PANEL
<any key>, 4 Disable, <code>, 2 Zone,
Press ESC to confirm and step back to
the previous menu.
28.4 Bypassing NAC outputs
FROM COMPUTER
Not available.
During maintenance or fault status, it may become necessary to bypass a NAC output, the bypassed
unit cannot be activated.
FROM PANEL
<any key>, 4 Disable, <code>, 3 NAC,
Press ESC to confirm the and step back
to the previous menu.
Zone 001
<Zone Description>
STATUS : _nabled
= Select Zone = Enable/Disable
NAC 001
< NAC Description >
STATUS : _nabled
= Output Select = Enable/Disable
To Next Page
Loading...
