Need help?Do you have a question about the INIM PREVIDIA COMPACT and is the answer not in the manual?
Details limitations and exclusions for product warranty coverage.
States the ownership of the document's content.
Provides contact and location information for the manufacturer.
Lists the manuals and documentation provided with the system.
Explains the manual's code, version, and graphic conventions used.
Details the four access levels for system operation and their permissions.
Covers CE marking and compliance with EU Regulation 305/2011.
Declares compliance with Directive 2014/53/EU for radio equipment.
Explains how to download performance declarations, conformity, and manuals.
Details the different Previdia Compact models and their specifications.
Describes the internal components and included accessories of the control panels.
Presents detailed technical data for small and large cabinet Previdia Compact models.
Identifies the various external and internal components of the large cabinet model.
Identifies the various external and internal components of the small cabinet model.
Details the output terminals, their names, current, and functions.
Describes the LED colours and states for fire extinguishment functions.
Illustrates the sequence of operations for fire extinguishment.
Explains the functions of inputs and outputs related to the gas extinguishing system.
Details the communicator module's purpose and its compliance with EN12094-1.
Lists the parts included with the Previdia-C-DIAL module.
Provides technical data for the repeater panel, including voltage, consumption, and antenna.
Identifies the user interface and internal components of the repeater unit.
Describes the function and purpose of Hornet+ networking.
Describes the function and purpose of IP networking.
Specifies environmental conditions and location criteria for the control panel.
Outlines the step-by-step process for installing the control panel system.
Details EN54 certification requirements for manual buttons, detectors, and wiring.
Provides instructions for physically attaching the control panel to a wall.
Details the steps for installing the Previdia-C-DIAL module inside the control panel.
Introduces the wiring process and safety precautions for the control panel.
Explains how to connect the main power supply according to EN54-4 standards.
Describes the importance and connection of the protective earthing system for safety.
Details connecting 12V batteries in series and thermal probe placement.
Explains that I/O channels can be configured as supervised outputs or inputs.
Specifies the type and section of cables required for I/O terminal connections.
Illustrates wiring for polarized devices like sounders to I/O output channels.
Shows how to connect non-polarized devices like relays to I/O output channels.
Demonstrates connecting devices with alarm outputs to I/O input channels.
Details connecting devices with alarm and fault outputs to I/O input channels.
Explains how to wire relay outputs and configure for fault signaling.
Describes loop circuit definition, cable types, and maximum device capacity.
Illustrates the proper completion of wiring for peripheral devices on a loop.
Details connecting panels and repeaters using RS485 ports for a Hornet+ network.
Explains how to connect the control panel to the land-line (PSTN) using the Previdia-C-DIAL board.
Shows wiring for E-type output for alarm signaling on remote devices per EN54-2.
Illustrates wiring for J-type output for fault signaling on remote devices per EN54-2.
Advises regular system checks and refers to another manual for detailed instructions.
Provides guidance on proper disposal of obsolete electronic equipment.
Explains the WEEE directive for electronic waste disposal in Europe.
General| Brand | INIM |
|---|---|
| Model | PREVIDIA COMPACT |
| Category | Control Panel |
| Language | English |
To Next Page
