Need help?Do you have a question about the INIM SmartLight/S and is the answer not in the manual?
Lists key technical specifications like power, dimensions, and operating temperature.
Describes the frontplate layout, commands, and LED indicators on the main panel.
Explains how to connect devices to the loop circuit using 2 or 4 wire connections.
Instructions for connecting the primary power supply (230 Vac).
Guidance on connecting the two 12V batteries in series for the secondary power supply.
Checks for wiring integrity, isolation, and correct cable connections before powering up.
Procedures for powering up the system and connecting the batteries correctly.
Details how to access the programming mode using the programming jumper.
Guides on defining zones, their descriptions, and associated alarm parameters.
Sets the loop type (INIM, Argus, Apollo) and wiring method (2 or 4 wires).
Manual process for adding or removing devices from the loop configuration.
Guides on programming individual points for fire detection functions.
Troubleshooting guide for 'Open I/O' faults on loop connections.
Troubleshooting guide for 'Shorted I/O' faults on loop connections.
General| Brand | INIM |
|---|---|
| Model | SmartLight/S |
| Category | Control Panel |
| Language | English |
To Next Page
