BASIC ADJUSTMENT SETTINGS
page22
Skip
If you have set the "Skip" of one channel to "ON", then when you pressing CH∧/∨ and this
channel will be skipped.
1. Press CH∧/∨ or the number buttons on the remote control to select the channel you want to set.
2. Press / to select "Skip" in "Source" menu.
3. Press / to select "On" or "Off":
ON: the current channel skip function is on.
OFF: the current channel skip function is off.
4. EXAMPLE
If the current channel is 8, and you have set the "skip" to "ON", when you exit the settings, the
channel 8 will be skipped when you select channel.
Press number 8 on the remote control directly if you want to watch the TV program of the
channel 8.
If you want to cancel the channel skip function of channel 8, select channel 8 and press
TV MENU to enter LCD menu, then set the channel skip to "OFF".
5. Press OK to return to "Source" menu; press TV MENU to exit.
Auto Search
1. Press / to select "Auto Search" in "Channel Setup" menu.
2. Press / to activate auto search.
Antenna
1. Press TV MENU to bring up the TV menu screen.
2. Press / to select "Antenna".
3. Press / to change cable CATV and AIR.
4. Press OK to return; press TV MENU to exit.
3. This unit will search and memorize all channels viewable automatically in your area.
4. The unit will skip to the first channel to play when the auto search ends.
To Next Page
Loading...