HANDLING PRECAUTIONS
These precautions are recommended to avoid damage to your printer and its components.
Power supply
- Use the power supply voltage specified on the nameplate.
- Check the printer electrical outlet for proper polarity and grounding before connecting printer. Failure to do so may
result in fire and electric shock hazards.
- Be sure the printer is well-grounded. Failure to ground the printer may result in electrical shock, fire, and susceptibility
to electromagnetic interference.
- Avoid overloading the printer’s electrical outlet with multiple devices.
- Use only the electrical cord supplied by manufacturer with the printer.
Printer
- Wipe the printer clean with a soft cloth that is moistened with a neutral detergent. Do not allow liquid to enter the
printer. Or it may create risk of fire and electrical shock and cause malfunction. Do not clean the printer with benzene
or paint thinner, which may damage the paint.
- Never touch the print head nozzles. They can be easily damaged or clogged.
Regular Inspection and Maintenance
- Clean the ink system before leaving the printer for a long time (two weeks or more with the power off).
- Clean the ink system before charging ink after leaving the printer for a long time (two weeks or more with the power
off).
WORKING ENVIRONMENT
Before opening the machine box, please prepare a space more than 12m
2
(3mx4m) (the machine should be put in
the center);
Temperature of printer’s working environment should be between 16℃ and 28℃;
Space must be clean and dry, not including anything that may cause crumble;
Good ventilation to draw heat, moisture and dust out of the environment;
Good lighting for the maintenance of printer and checking print quality
To Next Page