Additional Tests
VIEWING VEHICLE INFORMATION
118 3140d
Viewing Available Modules
The scan tool can retrieve a list of modules supported by the vehicle
under test.
1. With the scan tool in OBD2 mode, press
and release the M button.
The Main Menu displays.
2. Use the UP
and DOWN buttons,
as necessary, to highlight Vehicle
Information, then press the ENTER
button.
The Vehicle Info Menu displays.
3. Use the UP
and DOWN buttons,
as necessary, to highlight Available
Modules, then press the ENTER
button.
4. A "One moment please..." message
displays while the requested information
is retrieved from the vehicle's computer.
5. When the retrieval process is completed,
a complete list of modules supported by
the vehicle under test is shown on the
scan tool's display. Use the UP
and
DOWN
buttons, as necessary, to
view the entire list.
6. When you have finished viewing the list
of available modules, press the M
button to return to exit.
Viewing In-use Performance Tracking (IPT)
The scan tool can retrieve In-use Performance Tracking (IPT) statistics
for monitors supported by the vehicle under test. Two values are
returned for each monitor; the number of times that all conditions
necessary for a specific monitor to detect a malfunction have been
encountered (XXXCOND), and the number of times that the vehicle has
been operated under the specific conditions for the monitor (XXXCOMP).
Statistics are also provided for the number of times the vehicle has been
operated in OBD monitoring conditions (OBDCOND), and the number of
times the vehicle’s engine has been started (IGNCNTR).
1. With the scan tool in OBD2 mode, press
and release the M button.
The Main Menu displays.
To Next Page
Loading...
