Additional Tests
ADJUSTMENTS AND SETTINGS
3140d 125
2. Use the UP and DOWN buttons,
as necessary, to highlight the desired
display language.
3. When the desired display language is
highlighted, press the ENTER
button
to save your changes and return to the
Tool Setting Menu (shown in the
selected display language).
Setting the Unit of Measurement
1. Use the UP
and DOWN buttons,
as necessary, to highlight Unit of
Measurement in the Tool Setting Menu,
then press the ENTER
button.
2. Use the UP
and DOWN buttons,
as necessary, to highlight the desired
Unit of Measurement.
3. When the desired Unit of Measurement
value is selected, press the ENTER
button to save your changes and return to
the Tool Setting Menu.
Exiting the Tool Setting Mode
Press the M button.
To Next Page
Loading...
