Inovance IS300 Series - IS300 Servo Drive Jumper Function Description

2.4 IS300 Servo Drive Jumper Function Description
Jumper
number
Jumper
position
Function description
Jumper
position
Function description
J2
GND terminal
connect-to-ground
capacitance(Adopt
when the drive
connect-to-ground)
GND terminal
connect-to-ground
capacitance(Adopt when
the drive
connect-to-ground)
J3
GND terminal
connect-to-ground
capacitance(Adopt
when the drive
connect-to-ground)
GND terminal
connect-to-ground
capacitance(Adopt when
the drive
connect-to-ground)
J4
AO1 output in the form
of voltage˄DC0 to 10V˅
AO1 output in the form
o
voltage˄0 to 20mA˅
J5
AI3 input in the form of
voltage ˄ DC-10 to
+10V˅
AI3 input in the form of
voltage˄0 to 20mA˅
J6
AO2 output in the form
of voltage˄DC0 to 10V˅
AO2 output in the form of
current
J7
Internal power supply
drives the input terminal
DI1 to DI5
External power supply
drives the input terminal
DI1 ~ DI5
J8
CAN communication
connect to terminal
resistors, the terminal
equipment adopt when
multi-machine
communications,.
CAN communication does
not connect to terminal
resistors, the middle
equipment adopt when
multi-machine
communications.
J9
485 communication
connect to the terminal
resistors, the terminal
equipment adopt when
multi-machine
communications,
485 communication does
not connect to the terminal
resistors, the middle
equipment adopt when
multi-machine
communications,
Note: Jumper position indicates the position of connection terminals observation
efesotomasyon.com