Inovance IS580 Series - Page 4

IS580 User Manual Preface
- 3 -
■
Standard Compliant
The IS580 series servo drive complies with the international standards listed in the following table.
Directive Directive Code Standard
EMC directive 2004/108/EC EN 61800-3
EN 55011
EN 61000-6-2
LVD directive 2006/95/EC
93/68/EEC
EN 61800-5-1
The IS580 series servo drive complies with the requirements of standard IEC/EN 61800-3 on the condition of
correct installation and use by following the instructions in sections 8.3.2 and 8.3.5.