MD021 Plastic Wire Drawing Machine User Manual
When the inverter is in running or stop state, you can press ►► to
display running state or stop state parameters in turn.
The parameter display sequence when you press ►► in running state
is as follows:
Operating Frequency ►► Set Frequency ►► Bus Voltage ►►
Output Voltage ►► AI Input Voltage ►► DI Status ►► DO Status
►► PID Setting ►► PID Feedback
The parameter display sequence when you press ►► in stop state is
as follows:
Set Frequency ►► Bus Voltage ►► AI Input Voltage ►► DI
Status ►► DO Status
To Next Page
Loading...