Inovance MD021 - Err14 and Err15 Faults

MD021 Plastic Wire Drawing Machine User Manual
Display
Fault Name
Troubleshooting
channel.
Err15
External fault
When the DI terminal has input
indicating an external fault,
information about the fault is
displayed.
Perform troubleshooting based on
the displayed information.
Err16
Communication
fault
1. Check whether the host
computer works properly. If not,
check the connection to the host
computer.
2. Check whether RS485
communication is normal. If not,
check the communication cable.
3. Check whether the
communication parameters in
group F3 are correctly set. If not,
modify the communication
parameters.
Err17
Wire-break
detection fault
Information about the wire-break
fault is displayed when