Inovance MD300 Series - Page 44

Chapter 5 Function Parameter Table
-42-
Code Name Setup range
Minimum
unit
Factory
default
value
Cha-
nge
F0-03
Auxiliary
Frequency source
Y selection
0: invalid
1: valid (auxiliary frequency
source AI2, which can be 0, 1
and 2 only corresponding with
F0-02)
1 0 ×
F0-04
Digital preset
frequency
0.00 to upper limit frequency (It
is valid when the frequency
source is digital set)
0.00
Hz
50.00Hz
ż
F0-05
Acceleration time
1
0.0s 3000.0.0s
0.1 20.0s ż
F0-06
Deceleration time
1
0.0s  3000.0.0s
0.1 20.0s ż
F0-07
V/F curve
selection
0: Straight line V/F curve
1: Reserved
2: Square V/F curve
1 0 ×
F0-08
V/F control torque
boost
0.0: (automatic)
0.0%30.0%
0.1% 0.0% ż
F0-09
DI1 terminal
function selection
1 1 ×
F0-10
DI2 terminal
function selection
1 4 ×
F0-11
D13 terminal
function selection
0: No function
1: Forward rotation (FWD)
2: Reverse rotation (REV)
3: three-line control
4: Forward rotation Jog (FJOG)
5: Reverse rotation Jog (RJOG)
1 12 ×
efesotomasyon.com