Inovance MD300 Series - Page 45

Chapter 5 Function Parameter Table
-43-
Code Name Setup range
Minimum
unit
Factory
default
value
Cha-
nge
F0-12
DI4 terminal
function selection
6: Terminal UP
7: Terminal DOWN
8: coast to stop
9: Fault reset (RESET)
10: Reserved
External fault normally open
input
12: MS speed terminal 1
13: MS speed terminal 2
14: External fault normally
closed input
15: Reserved
16 AI1 and AI2 reference
switch
17-18: Reserved
19: UP and DOWN setup clear
(terminal and keyboard)
20: Running command
switching terminal
21: Reserved
If the input selects PULSE, all
DI4 functions are disabled, and
the input can only corresponds
to PULSE.
1 13 ×
F0-13
DO output
selection
0: no output
1: Inverter is running
2: Fault output
3: Frequency arrival
1 1 ż
efesotomasyon.com