Inovance MD380-5T5.5GB - Page 118

MD380 User Manual Function Code Table
- 117 -
)unction
Code
Parameter Name
Setting Range
Default Property
A1-11 VDO1 function selection
0: Short with physical DIx
internally
1–40: Refer to function selection
RISK\VLFDO'2LQJURXS)
0 ƿ
A1-12 VDO2 function selection
0: Short with physical DIx
internally
1–40: Refer to function selection
RISK\VLFDO'2LQJURXS)
0 ƿ
A1-13 VDO3 function selection
0: Short with physical Dix
internally
1–40: Refer to function selection
RISK\VLFDO'2LQJURXS)
0 ƿ
A1-14 VDO4 function selection
0: Short with physical Dix
internally
1–40: Refer to function selection
RISK\VLFDO'2LQJURXS)
0 ƿ
A1-15 VDO5 function selection
0: Short with physical Dix
internally
1–40: Refer to function selection
RISK\VLFDO'2LQJURXS)
0 ƿ
A1-16 VDO1 output delay
0.0–3600.0s
0.0s ƿ
A1-17 VDO2 output delay
0.0–3600.0s
0.0s ƿ
A1-18 VDO3 output delay
0.0–3600.0s
0.0s ƿ
A1-19 VDO4 output delay
0.0–3600.0s
0.0s ƿ
A1-20 VDO5 output delay
0.0–3600.0s
0.0s ƿ
A1-21 VDO state selection
Unit's digit (VDO1)
00000 ƿ
0: Positive logic
1: Reverse logic
Ten's digit (VDO2)
0, 1 (same as unit's digit)
Hundred's digit (VDO3)
0, 1 (same as unit's digit)
Thousand's digit (VDO4)
0, 1 (same as unit's digit)
Ten thousand's digit (VDO5)
0, 1 (same as unit's digit)
efesotomasyon.com