Inovance MD520 Series - Page 126

Options
‑125‑
Structure Drive Model Reactor Model Inductance (mH) Loss (W)
T8 MD520‑4T75(B) (S) MD‑OCL‑150‑0.047‑4T‑1% 0.047 ‑
MD520‑4T90(S) MD‑OCL‑200‑0.035‑4T‑1% 0.035 ‑
MD520‑4T110(S) MD‑OCL‑200‑0.035‑4T‑1% 0.035 ‑
T9 MD520‑4T132(S) MD‑OCL‑250‑0.028‑4T‑1% 0.028 ‑
MD520‑4T160(S) MD‑OCL‑250‑0.028‑4T‑1% 0.028 ‑
Note:
For T10 to T12 models, if AC output reactors are required, purchase AC output reactors with the model name containing
"‑L".
The T13 model is equipped with a built‑in output reactor as standard.
Table 5–47 Selection of Inovance AC output reactors (three‑phase 200 V to 240 V)
Structure Drive Model Reactor Model Inductance
(mH)
Loss (W)
T1 MD520‑2T0.4B(S) MD‑OCL‑5‑1.4‑4T‑1% 1.4 ‑
MD520‑2T0.7B(S) MD‑OCL‑5‑1.4‑4T‑1% 1.4 ‑
MD520‑2T1.1B(S) MD‑OCL‑7‑1.0‑4T‑1% 1.0 ‑
MD520‑2T1.5B(S) MD‑OCL‑10‑0.7‑4T‑1% 0.7 ‑
T2 MD520‑2T2.2B(S) MD‑OCL‑10‑0.7‑4T‑1% 0.7 ‑
MD520‑2T3.7B(S) MD‑OCL‑15‑0.47‑4T‑1% 0.47 ‑
T3 MD520‑2T5.5B(S) MD‑OCL‑30‑0.23‑4T‑1% 0.23 ‑
T4 MD520‑2T7.5B(S) MD‑OCL‑40‑0.18‑4T‑1% 0.18 ‑
T5 MD520‑2T11(B) (S) MD‑OCL‑60‑0.12‑4T‑1% 0.12 ‑
T6 MD520‑2T15(B) (S) MD‑OCL‑60‑0.12‑4T‑1% 0.12 ‑
MD520‑2T18.5(B)(S) MD‑OCL‑80‑0.087‑4T‑1% 0.087 ‑
T7 MD520‑2T22(B) (S) MD‑OCL‑90‑0.078‑4T‑1% 0.078 ‑
MD520‑2T30(B) (S) MD‑OCL‑120‑0.058‑4T‑1% 0.058 ‑
T8 MD520‑2T37(B) (S) MD‑OCL‑150‑0.047‑4T‑1% 0.047 ‑
MD520‑2T45(S) MD‑OCL‑200‑0.035‑4T‑1% 0.035 ‑
MD520‑2T55(S) MD‑OCL‑250‑0.028‑4T‑1% 0.028 ‑
T9 MD520‑2T75(S) MD‑OCL‑330‑0.021‑4T‑1% 0.021 ‑
Table 5–48 Selection of Inovance AC output reactors (single‑phase 200 V to 240 V)
Structure AC Drive Model Reactor Model Inductance
(mH)
Loss (W)
T2 MD520‑2S0.4B(S) MD‑OCL‑5‑1.4‑4T‑1% 1.4 ‑
MD520‑2S0.7B(S) MD‑OCL‑5‑1.4‑4T‑1% 1.4 ‑
MD520‑2S1.5B(S) MD‑OCL‑7‑1.0‑4T‑1% 1.0 ‑
MD520‑2S2.2B(S) MD‑OCL‑10‑0.7‑4T‑1% 0.7 ‑
The following figure and table describe dimensions of the AC output reactor.