Technical Data
‑163‑
Item
Technical specifications
Opera
tion
Command source Running commands can be given through the operating
panel, control terminal, or serial port communication,
which can be switched over in various ways.
Frequency reference
source
The drive supports 10 frequency reference sources,
including digital settings, analog voltage settings,
analog current settings, pulse, and serial port
communication, which can be switched over in various
ways.
Auxiliary frequency
reference source
The drive supports 10 auxiliary frequency reference
sources. It can implement fine tuning of the auxiliary
frequency and frequency synthesis.
Input terminal Standard:
Five DIs
Two AIs, AI1 and AI2. AI1 supports only ‑10 V to +10 V
voltage input, and AI2 supports ‑10 V to +10 V voltage
input, 0 mA to 20 mA current input, and temperature
input, which can be switched over through the DIP
switch.
Extension:
Five DIs
Output terminal Standard:
One DO
One relay output terminal
One FM terminal (can be set with the high‑speed pulse
output or common DO function)
One AO, supporting 0 mA to 20 mA current output or 0 V
to 10 V voltage output
Extension:
One DO
One relay output terminal
Display
and
operat
ing
panel
LED operating panel
It can display parameters and AC drive status (forward
running, reverse running, stop, operating panel/
terminal/communication control, speed/torque control,
STO state) and can be used to modify parameters.
LCD operating panel It is optional and displays content in Chinese, English, or
Russian. You can use it to modify parameters.
Parameter copy
You can use the LCD operating panel to implement
quick parameter upload and download.
Key locking and
function selection
Keys on the operating panel can be locked partially or
all keys can be locked. In addition, functions with
limited availability range can be assigned to some keys.
This can prevent accidental operation.
To Next Page
Loading...
