Technical Data
‑162‑
Item
Technical specifications
Custom
ized
function
Free programming
Free programming can be implemented. Word‑to‑bit
conversion, word and double word conversion, logic
(AND, OR, NOT, XOR, XNOT), arithmetic operations
(fixed‑point and floating point addition/subtraction/
multiplication/division, absolute value, numerical
comparison), selector switch, free filtering, switch‑on
and switch‑off delay through logic, multi‑point curve,
constant value
Self‑test The AC drive, motor, and encoder support self‑test. IGBT
shoot through, short circuit to ground, phase loss, and
inter‑phase short circuit tests are supported.
Long‑distance drive The drive supports long‑distance drive and various
types of output filters.
Reluctance motor The drive can control reluctance motors in FVC/SVC
mode, ferrite booster magnetos, pure reluctance
motors, and permanent magnet and ferrite hybrid
reluctance motors.
Electromagnetic coil The current frequency is set separately. The three‑phase
AC power supply with variable frequency is provided,
which applies main to electromagnetic mixers and
welding equipment.
Powerful software The software InoDriveShop allows you to upload and
download AC drive parameters and supports the
oscilloscope function. In addition, the InoDriveShop
supports remote commissioning and fault diagnosis.
With the oscilloscope function, you can monitor the
internal state of the AC drive.
To Next Page
Loading...
