‑1‑
Preface
Preface
Introduction
The SV660F series high performance AC servo drive provides a power range from 0.05
kW to 7.5 kW. It supports Profinet communication protocol and carries Ethernet
communication interfaces to work with the host controller for a networked operation
of multiple servo drives.
The SV660N series servo drive supports stiffness level setting, inertia auto‑tuning and
vibration suppression to simplify the operation process. It allows a quiet and stable
operation together with an MS1 series servo motor with low or medium inertia and a
23‑bit single‑turn or multi‑turn absolute encoder.
It is suitable for lithium battery PACK, printing and packaging, logistics, automobile
manufacturing, tobacco and other industries to achieve fast and accurate
collaborative control.
This guide presents the safety function and related certifications and standards,
wiring, commissioning process, troubleshooting and functions.
More Documents
Name
Data Code
Description
SV660F Series Servo
Drive Selection Guide
19011667
This guide introduces servo drive and motor
model selections, including their features,
specifications, configurations, and cable
selections.
SV660F Series Servo
Drive Hardware Guide
19011666
Presents installation and wiring of the servo
drive, including preparations before
installation, unpacking inspection and
transport, wiring, and routine maintenance.
SV660F Series Servo
Drive Commissioning
Guide
19011668
Presents servo commissioning, parameter
descriptions, troubleshooting, including the
operating panel, commissioning software, and
commissioning process and procedure.
SV660F Series Servo
Drive Function Guide
19011669
Presents functions and parameters, including
function overview, basic servo functions,
adjustment and parameter list.
SV660F Series Servo
Drive Communication
Guide
19011670
Presents functions and parameters of the
servo drive, including Profinet communication
configuration, fault descriptions, parameter
description, and communication application
cases.
SV660F Series Servo
Drive installation Guide
19011732
Describes installation and wiring of the servo
drive, including preparations before
installation, unpacking inspection and
transportation, mechanical installation and
electrical installation.
To Next Page
Loading...
Need help?
General
