Inovance SV660F Series - Connecting the STO Terminal (CN6)

Wiring
‑50‑
● Tighten the terminal screws with an angle not greater than 5°. Failure to comply
may damage the terminal screws.
4.3 Connecting the STO Terminal (CN6)
Applicable servo drives
STO applies to servo drives in the following two structures:
Size
Power Range
Structure
W×H×D (mm
3
)
A
0.2 kW–0.4 kW
Integrated structure
40 x 160 x 150
B
0.75 kW
Integrated structure
50 x 160 x 173
C
1 kW–1.5 kW
Split‑type structure
55 x 170 x 173
D
1.8 kW–3 kW
Split‑type structure
75 x 170 x 183
E
5 kW–7.5 kW
Split‑type structure
90 x 250 x 230
Note
The integrated structure refers to the integration of the control components and power
supply components on the same PCB.