Inovance SV660F Series - Keypad; Components of Servo Drives and Servo Motors; Operation Panel Display

Keypad
‑56‑
5 Keypad
5.1 Components of Servo Drives and Servo Motors
Figure 5‑1 Magnified view of the keypad
The operation panel of the SV660F Series servo drive consists of an LED (5‑digit, 8‑
segment) and five buttons. The keypad is used for value display, parameter setting,
user password setting and general function execution. The following table takes
parameter setting as an example to describe the general functions of the keys.
Table 5–1 Descriptions of keys
Name
Symbol Description
MODE
Switches among different modes.
Returns to the previous menu.
UP
Increases the value of the blinking digit for the
LED.
DOWN
Decreases the value of the blinking digit for the
LED.
SHIFT
Shifts the blinking digit for the LED.
You can view the high digits of the number
consisting of more than 5 digits.
SET
Switches to the lower‑level menu.
Executes commands such as storing parameter
setting value.
5.2 Operation Panel Display
The keypad can be used to display the servo drive status, parameters, faults, and
monitored values.