Inovance SV660F Series - Servo Drives in Size D (Rated Power: 1.0 Kw to 3.0 Kw)

Product Information
‑26‑
2.2.3 Servo Drives in Size D (Rated Power: 1.0 kW to 3.0 kW)
Figure 2‑3 Components (SIZE C:SV660FS7R6I/SZIE D:SV660FS012I)
Table 2–3 Description of Components (SIZE C:SV660FS7R6I/SZIE D:SV660FS012I)
No. Name
Description
①
5‑digit LED display
The 5‑digit 8‑segment LED display is used to show servo
system’s running state and parameter setting.
②
Keys
MODE: Used to switch parameters in sequence.
△: Used to increase the value of the blinking bit.
▽: Used to decrease the value of the blinking bit.
◁: Used to shift the blinking bit leftwards.
(Hold down: Turning to the next page when the displayed
number exceeds five digits)
SET: Used to save modifications and enter the next menu.
③
CHARGE (bus
voltage indicator)
Indicates the electric charge is present in the bus
capacitor. When the indicator turns on, charges possibly
still exist in the internal capacitor of the servo unit, even
if the power supply of the main circuit is OFF. To prevent
electric shock, do not touch the power terminals when
this indicator lights up.
④
L1C, L2C (control
circuit power input
terminals)
See the nameplate for the rated voltage class.