Inovance SV660N - 6.6 GAIN TUNING

20
INOVANCE TECHNOLGY EUROPE GmbH
SV660N Startup Procedure_EN_v1.4_20220826.docx
6.5.4.2 COMPARE WITH FACTORY VALUES
To compare parameter file with factory values follow the next procedure:
1. Open parameter file. Click on “Open Recipe” button and select the corresponding parameter file.
After opening the parameter file the values of this file are loaded in the column "Setting value".
2. Click “Compare” button and select “The set value is different from the factory value”
3. This is the comparison result: