Inovance SV660N - 1 GENERAL DATA; 2 PURPOSE OF THIS DOCUMENT; 3 REVISION HISTORY

3
INOVANCE TECHNOLGY EUROPE GmbH
SV660N Startup Procedure_EN_v1.4_20220826.docx
1 GENERAL DATA
Authors: RSR
Date: 26.08.2022
Hardware: SV660N
Software: InoDriverShop v3.2.1.1
Info: SV660N Start up procedure guide
2 PURPOSE OF THIS DOCUMENT
The purpose of this document is to facilitate the start-up and diagnosis of the SV660 servo drive. The SV660N
series high-performance AC servo drive covers a power range from 50 W to 7.5 kW. It supports EtherCAT
communication protocol to work with the host controller for a networked operation of multiple servo drives.
The document is divided into different sections to explain the basic wiring, communication with the diagnostic
PC and the operation of the InoDriverShop program, which is used to perform the configuration and diagnostic
functions of the servo drive.
In order to use the InoProShop software, you need the serial communication cable S6-L-T00-3.0, described in
the section 5. Serial Communication cable.
3 REVISION HISTORY
Revision
Date
Author
Description
1.2
4 February 21
RSR
First release
1.3
5 March 21
RSR
The following sections have been added:
6.5.4 Comparison
6.8.1 EtherCAT position interpolation
7 Axis Scaling
8 Absolute encoder system
9.4 CiA402 Object Dictionary
1.4
26 August 21
RSR
The following sections have been added:
8.2 Data range in the absolute position linear mode
6.6.4 Inertia ratio calculation
The following sections have been modified:
6.4.4 Motor parameters
6.6.2 STUNE