6
INOVANCE TECHNOLGY EUROPE GmbH
SV660N Startup Procedure_EN_v1.4_20220826.docx
5 SERIAL COMMUNICATION CABLE
The cable used to connect the SV660N with the computer is S6-L-T00-3.0. It is a DB9 (PC side) to RJ45 (drive
side) cable. The physical layer is according to RS232 communication.
Model Number: S6-L-T00-3.0
Material Code: 15041243
Figure 1. Connection relation between the servo drive and PC communication cable pins
Figure 2. Pin definition of DB9 ("B" in the preceding figure) on the PC side
A female USB / RS232 converter will be needed if your computer is not equipped with a RS232 serial port.
To Next Page
Loading...
