Inovance SV660N - Page 32

2
INOVANCE TECHNOLGY EUROPE GmbH
SV660N Startup Procedure_EN_v1.4_20220826.docx
Start
Access to ETune
tool
Configure the mode
and the motion
profile
WARNING
Yes
No
Motor starts to
move
ETune is completed
ETune results
End
Click OK to stop motor
The motor starts to move
back and forth according
to the settings in the
previous dialog
Warning message. Click
on “Ok” buttin to start
auto-tuning
The Etune results can be
stored in a file.
Click on “Cancel” button
to finalize the procedure