Insignia NS-OTRC15SS9 - Changing Light Bulbs; Countertop Light Replacement; Interior Microwave Light Replacement

www.insigniaproducts.com
14
1.5 Cu. Ft. Over-the-Range Convection Microwave
5 Insert wood screw(s) through the mounting plate and into the hole(s) drilled in the stud(s), then tighten both the wood
screw(s) and toggle bolt(s) with a Phillips screwdriver to mount the plate. Make sure that the plate is centered before
tightening fully.
Caution: Be careful to avoid pinching your fingers between the back of the mounting plate and the wall.
You’ll need:
Mounting plate
Wall
Toggle wing
Toggle bolt
Wood screws
Mounting plate
(ships attached to microwave)
Toggle bolts
Phillips screwdrivers