Insignia NS-OTRC15SS9 Installation Guide

21
NS-OTRC15SS9
www.insigniaproducts.com
Step 8: Option A - Connecting ductwork
1 Open the cabinet and slide the exhaust adapter front-to-back or side-to-side to adjust.
2 Extend the house duct down to connect to the exhaust adapter.
3 Seal the exhaust duct joints with duct tape.
4 You’re finished! Skip to “
Before using your microwave” on page 38.
You’ll need:
Blower plate
Exhaust adapter
Damper
Back of microwave
House duct
Duct tape

Insignia NS-OTRC15SS9 Specifications

General

Brand	Insignia
Model	NS-OTRC15SS9
Category	Microwave Oven
Language	English