Service Manual_2017-V1
25
8.6 Compressor case
Rear cover and compressor case
Rear cover and compressor case
Terminal box of the compressor
Compressor and the cooling system pipe
1）Cut off the power, remove the goods in the refrigerator,
with the tape to make the door fixed firmly and prevent
the door dropping when the refrigerator dumping.
Evaporator in refrigerating chamber
Evaporator in refrigerating chamber
None
Components on the evaporator None
Sensor in freezing chamber
Sensor in freezing chamber
Sensor in refrigerating chamber
1） Before remove the sensor, the refrigerating duct
assembly should be removed Remove the air duct
assembly from the refrigerating.
2） Remove the sensor.
Ambient temperature sensor
Sensor position in the bottom of the box
Sensor in Variable temperature chamber
Sensor in Variable temperature chamber None
Thermostat None
To Next Page
Loading...
Need help?
General
