Insignia NS-RTM21SS7 Service Manual

Service Manual_2017-V1
28
10）Use Pipe cutter cut off the condenser tube❽, then
Shear off capillary ❾ by the capillary tube scissors.
11）Replace the compressorand welding the compressor
pipeline.-❿Welding the process pipeline.-⓫Welding the
low-pressure muffler.-⓬Welding the high-pressure
exhaust pipe.
12）Replace the filter, Cu-Fe tubes welding ⓭ used Ag
welding rod, Cu-Cu tubes welding⓮ used Cu welding
rod.
13）Vacuum system,The degree of vacuum below 6Pa.
14
）
Perfusion refrigerant.

Insignia NS-RTM21SS7 Specifications

General

Brand	Insignia
Model	NS-RTM21SS7
Category	Refrigerator
Language	English