Why is steam gushing from the steam release valve during pressure cooking cycle of my Instant POT PRO PLUS?
Steam gushing from the steam release valve during the pressure cooking cycle can happen because: * There is not enough liquid in the cooking pot. Add thin, water-based liquid to the cooking pot according to its size. * There is a pressure sensor control failure. Contact Customer Care.
Why is steam leaking from the side of the Instant POT PRO PLUS Kitchen Appliances lid?
Steam leaking from the side of the lid can be due to several reasons: * There is no sealing ring in the lid. In this case, install a sealing ring. * The sealing ring is damaged or not installed properly. Replace the sealing ring. * There is food debris on the sealing ring. Remove the sealing ring and clean it thoroughly. * The lid is not closed properly. Open, then close the lid. * The sealing ring rack is warped or off-center. Remove the sealing ring from the lid, then check the sealing ring rack for bends or warps. Contact Customer Care. * The cooking pot rim may be misshapen. Check for deformation and contact Customer Care.
Is minor steam leaking from my Instant POT PRO PLUS normal?
Minor steam leaking or hissing from the steam release vent during the cooking cycle of your Instant Kitchen Appliances is normal. The cooker is regulating excess pressure, so no action is required.
What to do if steam gushes from the steam release vent on my Instant POT PRO PLUS?
If steam gushes from the steam release vent when the Steam Release switch is in the Seal position on your Instant Kitchen Appliances, it could be due to not enough liquid in the cooking pot. Add thin, water-based liquid to the cooking pot: 1 1/2 cups (12 oz / 375 mL). Also, it could be a pressure sensor control failure. In this case contact Consumer Care.
Why does steam gush from the steam release valve of my Instant Electric Pressure Cooker during the pressure cooking cycle?
If steam is gushing from the steam release valve during the pressure cooking cycle of your Instant Electric Pressure Cooker, it may be due to not enough liquid in the inner pot. Adding thin, water-based liquid to the inner pot according to its size can resolve this. It may also be caused by a pressure sensor control failure. Contact Customer Care for assistance.
What to do if an error code appears on my Instant Electric Pressure Cooker display and it beeps continuously?
Safe placement and general use guidelines for the appliance.
Specific safety instructions for pressure cooking operations.
Warnings and instructions to prevent electrical shock hazards.
Identifies the various parts of the Instant Pot lid.
Details the cooker base, control panel, and inner cooking pot.
Lists and illustrates the accessories provided with the appliance.
Explains the layout and functions of the control panel.
Instructions for adjusting sound, temperature scale, and memorized settings.
Steps for cleaning and assembling the appliance before first use.
Guide for conducting an initial test run to familiarize with operation.
Step-by-step guide for correctly closing and opening the appliance lid.
Describes the different methods for releasing steam.
Explains the three stages: pre-heating, cooking, and steam release.
Details Pressure Cook, Rice, Steam, and Slow Cook programs.
Covers Sauté, Sous Vide, Bake, and Yogurt programs.
Explains Keep Warm and NutriBoost features.
Instructions for setting a delayed start for cooking.
Instructions for setting a timer without cooking.
Care instructions for the sealing ring, anti-block shield, and steam release assembly.
Procedures for cleaning the cooking pot, power cord, and cooker base.
Solutions for problems like lid issues, leaks, and stuck pots.
Explains common error codes and their solutions.
Information on ordering replacement parts and finding additional resources.
Details the warranty coverage, exclusions, and how to obtain service.
Safe placement and general use guidelines for the appliance.
Specific safety instructions for pressure cooking operations.
Warnings and instructions to prevent electrical shock hazards.
Identifies the various parts of the Instant Pot lid.
Details the cooker base, control panel, and inner cooking pot.
Lists and illustrates the accessories provided with the appliance.
Explains the layout and functions of the control panel.
Instructions for adjusting sound, temperature scale, and memorized settings.
Steps for cleaning and assembling the appliance before first use.
Guide for conducting an initial test run to familiarize with operation.
Step-by-step guide for correctly closing and opening the appliance lid.
Describes the different methods for releasing steam.
Explains the three stages: pre-heating, cooking, and steam release.
Details Pressure Cook, Rice, Steam, and Slow Cook programs.
Covers Sauté, Sous Vide, Bake, and Yogurt programs.
Explains Keep Warm and NutriBoost features.
Instructions for setting a delayed start for cooking.
Instructions for setting a timer without cooking.
Care instructions for the sealing ring, anti-block shield, and steam release assembly.
Procedures for cleaning the cooking pot, power cord, and cooker base.
Solutions for problems like lid issues, leaks, and stuck pots.
Explains common error codes and their solutions.
Information on ordering replacement parts and finding additional resources.
Details the warranty coverage, exclusions, and how to obtain service.
General| Model | Instant POT PRO PLUS |
|---|---|
| Capacity | 6 Quarts |
| Voltage | 120V |
| Warranty | 1-Year Limited Warranty |
| Functions | Pressure Cook, Slow Cook, Sauté, Steam, Yogurt, Sterilize, Warm |
| Control | Touchscreen, App Control |
| Material | Stainless Steel |
| Safety Features | Overheat Protection, Safety Lid Lock |
| Smart Features | App Control |
| Wattage | 1200 Watts |
| Pressure Levels | High and Low |
| Type | Multi-functional pressure cooker |
To Next Page
