I2 Minimate Pro Operator Manual
F
Fast, 7–6
Features, 6–3
Features and Benefits, 6–7
FFT, 8–12
Firmware Release Number, 2–4
Fixed Record Time, 9–19
Frequency Analysis, 6–4
Frequency Range, 6–4
Frequency Response, 6–4
Frequency Weighting, 10–2
G
General Notes, 9–27
Geophone
Geophone Operation, 10–7
Geophone Calibration, 10–8
Geophone Leveling Plate, 10–5
Geophone Theory, 10–7
Geophone Wall Mount Kit, 10–6
GPS, 6–3, 7–4
GPS Location, 9–25
Ground Spikes, 10–3
Ground Vibrations
Analysis Techniques, 12–1
H
Handling Precautions, 3–1
Hard Surface Installation, 10–4
Histogram, 6–4
Histogram Combo, 6–4
I
Identification Numbers, 1–1
IEC 61672-1, 7–7
IEC Class 1, 7–4
Imperial, 9–31
Installation
bolting, 10–4
ground spikes, 10–3
hard surface installation, 10–4
microphone, 10–9
sandbagging, 10–3
Installing an ISEE or DIN Geophone, 10–2
Installing the ISEE Microphone, 10–9
IP Address, 9–34
Irregular Waveforms, 12–6
ISEE, 5–2
ISEE Geophone, 6–9, 10–2
ISEE Linear Microphone, 6–1, 6–4, 6–10, 10–2
ISEE/DIN Geophones, 6–4
J
Job Number, 9–27
K
Keypad, 6–7
L
LAN, 9–34
Level Installation, 10–2
Linear L
measurement scale, 10–10
specifications, 6–4
theory of operation, 10–10
Location, 9–26
M
Maintenance Menu, 2–4, 4–1
Max Weight Table, 9–24
Measurement Scales, 10–10
Measurement System, 9–31
Memory, 2–4
checking amount available, 2–3
Menu Navigation, 6–12, 6–13
Metric, 9–31
Mic Response, 7–6
Microphone
calibration requirements, 10–8, 10–10
installation, 10–9
linear, 10–10
serial number, 1–1
theory of operation, 10–10
windscreen, 6–10
Microphone Stand Assembly, 6–10
MiniMate Plus
sandbagging, 10–3
Mode, 9–35
Model and
Serial Number, 2–4
Models, 6–1
Modem Type, 8–5
Monitoring Log, 8–12
Monitoring Mode, 4–1
Monitoring Scheduler, 9–21
N
National Frequency, 6–7
National Frequency Standards, 6–8
Null Modem Cable, 6–11
O
Operating Frequency Range, 10–2
To Next Page
Loading...
General