Minimate Pro Operator Manual 9–3
9.2. Select Setup File
Previously saved setup files can be selected as the default setup file or deleted. These files are
created when you have edited and saved settings within the View/Edit Setup File menu, or when
you have edited settings within the Blastware Setup menu and downloaded them to the unit.
1. From the main menu on the monitor, select the Setup key on the unit to access the main setup
selection menu. Press the Enter key to access Select Setup File.
2. Press the Up or Down Arrow keys on the unit to highlight Next/Prev Setup Files. Highlight
the Setup file that you want to use or delete. Press the Enter key to access the popup menu.
3. Press the Up or Down Arrow key to highlight Select Current Setup, to use the file as the
default setup, or Delete Setup File to permanently remove the file from the unit. Press the
Cancel key to exit the Select Setup File menu.
9.3. Select Operator
Operator names can be deleted, renamed, or added. The current operator name is displayed on the
Event Reports and at the upper right-hand corner of the Select Operator menu.
1. From the Main Display on the monitor, select the Setup key on the unit to access Main
Menu. Press the Down Arrow key and highlight the Select Operator menu item. Press the
Enter key to access Select Operator.
2. Press the Up or Down Arrow keys on the unit to highlight the Next/Prev operator.
3. Press the Enter key to Select an Operator for the unit.
To Next Page
Loading...
General