Minimate Pro Operator Manual 6–7
6.3.1. Features and Benefits
The Minimate Pro offers outstanding features unequaled in the industry. The following lists some
of the features. Please see the specifications located in the Appendix of this manual for a complete
list.
Two Year Warranty – Full two year parts and labor warranty on the monitor. A calibration
and equipment check at the one year mark is required to ensure continued reliable performance
and the second year of the warranty.
Full Waveform Event Capacity – For Minimate Pro4, 8000-plus 1 second Events at 1,024
S/s sample rate. For Minimate Pro6
with two geophones, 7100-plus 1 second Events at 1,024 S/s
sample rate.
Personal and Job Specific Information – Customize how your monitor works with saved
Setups, Notes, Name and Location information.
Keypad – Large 10-key interface helps you navigate through the simple menu structure.
Manual Record Mode is at the tip of your finger, as are the Setup and Sensor Check
features.
Large Backlit Display – Large display and characters for easy reading; you choose the
backlight color option and timeout settings for battery conservation.
Intuitive Interface – Graphic icons keep you informed of battery and memory levels, and
dynamic display of Peak Vibration, Zero Crossing Frequency, and Peak Overpressure in
imperial or metric units keeps you informed as Events occur.
Multiple Record Modes – Offers you unlimited flexibility during monitoring operations with
Manual Waveform, Waveform, Histogram and Histogram Combo with programmed
start/stop recording options. Optional Vibration Dose Value (VDV) with the purchase of
Blastware Advanced Module.
Full Waveform Event Analysis – Full field analysis of the Event including Peak Particle
Velocity (PPV), Peak Air (sound), Pressure, Peak Vector Sum (PVS), Peak Acceleration,
and Peak Displacement. For any Event, view Operator, Trigger Levels, Duration, Max
Vibration and Overpressure, ZC Frequency, and Sensor Check information right on the
monitor.
• National Frequency Analysis Standards – The Minimate Pro supports numerous
Compliance Reports, also called National Frequency Analysis Standards. Two frequency
standards, U.S.A. USBM/OSMRE and German DIN 4150, appear in the image below. Use the
Blastware software to choose the Compliance Report used by the monitor.
To Next Page
Loading...
General