Accessories M10-14179-EN
1-8
Automatic Grip Controller
You can operate the grips with an optional automatic grip controller. Controllers
are available for Instron electromechanical systems.
A grip control unit, foot switch and interconnecting cables comprise the grip
controller. The grip control unit is a small rectangular enclosure which mounts to
the outside of a load frame column. The unit contains solenoid valves and a small
printed circuit board. On the outside of the unit there are three pneumatic
connections and a load frame interface connector.
For more detail on the automatic grip controllers, refer to the appropriate grip
controller manuals.
To Next Page
Loading...
Need help?
General