Instron 2712 Series User Manual

2712-003, 2712-004 and 2712-018, 2712-020 M10-14179-EN
2-6
2712-003, 2712-004 and 2712-018, 2712-020
Specifications
Table 2-6. 2712-003, -004, -018, -020 Specifications
Parameter Specification
Load capacity 1 kN (225 lbf)
Test application Tensile
Mechanical connection
2712-003 and 2712-004
Upper fitting
Lower fitting
2712-018 and 2712-020
Upper fitting
Lower fitting
Type Cm (1/4 inch Clevis pin)
Type Dm (1/2 inch Clevis pin)
Type O (6 mm Clevis pin)
Type O (6 mm Clevis pin)
Specimen thickness - Maximum
2712-003 and 2712-020
2712-004 and 2712-018
6.35 mm (0.25 in) with all jaw faces except:
2.35 mm (0.09 in) with jaw face 2702-060
a
12 mm (0.5 in) with all jaw faces except:
8 mm (0.31 in) with jaw face 2702-060
a
Refer to Table 2-14 on page 2-15 for
compatible jaw faces
Gripping force - Maximum
2712-003
2712-004
2712-018
2712-020
3.6 kN (809 lbf)
1.8 kN (405 lbf)
1.8 kN (405 lbf)
3.6 kN (809 lbf)
Temperature range -29
o
C to 82
o
C (-20
o
F to 180
o
F)
Air pressure - Maximum 6.2 bar (90 PSI)
Weight
2712-003 and 2712-004
(upper grip)
2712-018 and 2712-020
(each grip)
1.4 kg (3 lb)
1.2 kg (2.6 lb)
a. Jaw face 2702-060 applies only to 2712-003 and 2712-004 grips.

Instron 2712 Series Specifications

General

Brand	Instron
Model	2712 Series
Category	Control Unit
Language	English