Instron 2712 Series User Manual

2-11
2732-003, 2732-004, 2732-008 and 2732-009
Specifications
2732-003, 2732-004, 2732-008 and 2732-009
Specifications
Dimensions
Figure 2-5 on page 2-12 illustrates the dimensions for the 2732-003, 2732-004,
2732-008 and 2732-009 grips.
Table 2-10. 2732-003, 2732-004, 2732-008 and 2832-009
Specifications
Parameter Specification
Load capacity 1 kN (225 lbf)
Test application Tensile
Mechanical connection Pneumatic connection
Specimen thickness - Maximum
2732-003 and 2732-008
2732-004 and 2732-009
6.35 mm (0.25 in) with all jaw faces except:
2.35 mm (0.09 in) with jaw face 2702-060
12 mm (0.5 in) with all jaw faces except:
8 mm (0.31 in) with jaw face 2702-060
Refer to Table 2-14 on page 2-15 for
compatible jaw faces
Gripping force - Maximum 1.8 kN (360 lbf)
Temperature range -70
o
to 315
o
C (-100
o
to 600
o
F)
Air pressure - Maximum 6.2 bar (90 PSI)
Weight 4 kg (8.8 lb)
Table 2-11. 2732-003, 2732-004, 2732-008 and 2732-009 Dimensions
Letter
Designation Dimension
Measurement
mm (in)
A Width 136 (5.3)
B Effective length 194 (7.6)
C Throat depth 47 (1.8)
D Throat depth 17 (0.7)

Instron 2712 Series Specifications

General

Brand	Instron
Model	2712 Series
Category	Control Unit
Language	English