4-3
Opening and Closing the Grips
Operation
Opening and Closing the Grips
The method you use to close the grips depends on the configuration of your
pneumatic system.
Toggle Valve
• To close the grip, move the toggle valve away from the specimen.
• To open grip, move the air toggle valve toward the specimen.
Foot Switch
• To close the upper grip, press the pedal about half-way to engage the first
position.
• To close the lower grip, press the pedal completely until it locks. This position
also maintains pressure to both grips.
• To open the grips, kick the toe plate at the front of the switch.
Automatic Grip Controller
Refer to the Automatic Grip Controller manual for complete operational details.
To Next Page
Loading...
Need help?
General