2-9
2712-016
Specifications
2712-016
Specifications
Dimensions
Figure 2-4 on page 2-10 illustrates the dimensions for the 2712-016 grips.
Table 2-8. 2712-016 Specifications
Parameter Specification
Load capacity 2 kN (450 lbf)
Test application Tensile
Mechanical connection
Upper fitting
Lower fitting
Type Cm (1/4 inch Clevis pin)
Type Dm (1/2 inch Clevis pin)
Specimen thickness - Maximum 12 mm (0.5 in) with all jaw faces except:
8 mm (0.31 in) with jaw face 2702-060
Refer to Table 2-14 on page 2-15 for
compatible jaw faces
Gripping force - Maximum 5 kN (1000 lbf)
Temperature range -29
o
C to 82
o
C (-20
o
F to 180
o
F)
Air pressure - Maximum 6.2 bar (90 PSI)
Weight (Upper grip) 4.2 kg (5.3 lb)
Table 2-9. 2712-016 Dimensions
Letter
Designation Dimension
Measurement
mm (in)
A Width 166 (6.5)
B Effective length
Upper grip
Lower grip
230 (9.0)
240 (9.5)
C Throat depth 47 (1.8)
D Throat depth 22 (0.8)
To Next Page
Loading...
Need help?
General